The closest thing to a solution for me was gwaterman18's response: In one of the links from the comments ( ), I've had the same problem, where I was playing a game and the display just seemingly failed. TLDR: Xbox 360 Slim hardware may have caused TV's HDMI port to fail. Sometimes Xbox 360 takes a little bit of time as it starts up before it outputs to the screen. Make sure to test it thoroughly before writing off a solution. You could do this blind to begin with to avoid this extra concern, but I find mistakes are more likely when you can't see. Note I believe it should keep the setting even though you switch cables after setting it, but if I am wrong, you may have to go back and check if it lost your settings, meaning you'll have to do this blind with the HDMI plugged in. If that works, go through increasing the resolution setting to find the best resolution that works for your display. Try lower resolutions(up and A selects a lower resolution, but since the menu.With an HD AV connector (some connectors have a switch on them for HDTV), ensure that the directions are correct, otherwise you are flying blind. The quick test is to try it with a display that you know supports 1080p HDMI in and if it works without changing anything, then that seems to be your problem, but it may still be worth it to try changing the resolution on the 360 anyways: It seems to want to default to the highest resolution which not all displays support. There is also the possibility that your display is having trouble with the resolution that the 360 is using. Since you say you've done the first points, the display setting reset is all that you haven't tried so cold boot the console and hold Y+ RT. The display settings are reset to the default settings, and then the console automatically restarts. The player 1 controller will have the upper-left light illuminated.Īs the console starts, on the controller, press and hold Y while pulling the right trigger. Make sure that you use the player 1 controller when you do this. Note If you are using an Xbox 360 Wireless Controller, turn on the console by using the Guide button on the controller.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |